How to Reset Or Setup Belkin Range Extender

Hello everyone

installing or resetting the Belkin range extender is quite easy as long as you Know How to use Belkin. range & follow the correct guidelines given below-

The wifi range extender will help you boost the signal & strength of your existing Wireless Router. Belkin extenders are compatible With almost Every wireless Modem and Wireless Router.

https://Belkin.range is used to set up a wifi range extender and today we will explain how It can be used to manage the wireless range extender settings and services.

if you have a brand new Range extender then skip the reset Part and Jump to the Installation portion of this Guide. But for those Who have an older range extender please reset the wifi range extender Before you go For installation.

Reset Will Also help you to restore the factory default settings of the wifi range extender & Provide you a fresh start. it also makes Troubleshooting Belkin extender Problems easy.

After Reset of your wireless extender, You can set up the Belkin range extender as per recommended settings.

Reset Belkin range extender

1. Find the circular button marked “Reset” on the back of your Extender.

2. Use a pin or paperclip and press the “Reset” button.

3. Hold the “Reset” button down for 10-15 seconds & see all lights flashing on the extender.

4. Release the Reset button & Reboot the range extender.

5. Wait for one minute for your range extender to fully Reboot and restore the factory setting.

Now your range extender has been Fully Reset and is Ready to be Configured & installed. Now Lets Go And setup Your wireless Range extender –

Tip – You Can find the default username & password in the box of your New Belkin extender or Look at the label at the bottom of your wifi range extender.

at Any Point, you feel that you may need help or assistance with the wifi range extender please go to free extender and router assistance to get easy and free basic troubleshooting instructions.

Setup Belkin range extender

• plug Your range Extender To power And Restart Your Computer.
• once both devices Are rebooted You can See a network By the name of Belkin.setup or any new wifi extender name, please Connect With it if it is not password protected.

• Now Open Your Browser And It Will Automatically Take yours to wifi range Extender Setup Page.

Tips:-In Case You Don’t see a range extender setup Page Please Type Belkin.range or 192.168.206.1 to access the Console.

• Follow The Instructions And Select Your Wireless Network Name Type The Password And Hit Next.
• Once Your Extender Is Configured You Can Place It Anywhere In Your House and Get Your Extended Network All Over Your Home.

In Case This Fails You Can Also Install Range Extender Using WPS Method.

Read More About –Understand Belkin.range & Install it With Smartphone

Use Smartphone to install a wifi range extender 

• Plug the wireless range extender into a power outlet.
• Use your mobile device or computer to browse the available networks and select the Belkin setup from the list.

in any case, if the Belkin.setup won’t show up on your computer please refresh the available network list again. You can also troubleshoot Belkin range extender if there is an issue with installation.

Launch Your Web browser and navigate to http://Belkin.range

• Just click Get Started on Belkin’s setup Web page.

• Now select your home’s WiFi name from the list of available networks.

• Enter your WiFi network’s password when prompted and select next.

• Select your WiFi network once again, click Next, and then click Create Extended Network.
• You can set up a new username and password for your range extender as you wish.

Setup Belkin Range Extender Using WPS

• Power on the Wifi router and belkin range extender and be setup ready.
• Push and hold the WPS button on your Belkin range extender for five seconds.

• release the key and look at your extender light you see flashing lights on.
• Indicating WPS has been initiated. Push and hold the WPS button on your home’s router within two minutes of initiating WPS on the extender.

The final configuration will be completed automatically between the two devices from there.

WPS PIN Method to Setup Belkin Extender

See If your device supports it, you’ll typically find this PIN either on the product label — usually on the back or bottom of the router itself — or within your router’s configuration utility.
Since it varies based on manufacturer and model, refer to your product’s documentation for more information.

• Launch the Web browser on your computer or mobile device and navigate to http://belkin.range
• Now Click Wi-Fi Protected (WPS) under Extended Network Settings, Then enter your device’s WPS PIN in the Enter Client Device PIN field.

• Please Click Enroll to complete the configuration.

 we hope this will help you to configure your Belkin range extender. there is One More Method One Can Use to Configure Belkin Extender If Wireless Method Fails to Work 

Use Ethernet Cable to Install Belkin Extender

Most of the steps are Quite the Same as we have explained in this Post But the Connection Type is a Bit Different. Let’s say if you are not able to Connect With Belkin.setup network Or If you can’t access the Belkin extender Configuration dashboard then its Really important that you try this method

You Need wireless Enabled Laptop with a Full Browser, a 2 Meter Internet Cable (Ethernet Cable) & Follow these steps – 

1. plug the Belkin extender to the Power & Plug the Ethernet Cable to the LAN Port of your Belkin extender & From the second End of the Ethernet Connect Your Laptop. Turn off the Wireless Capability (Switch) off.

2- Open the  Browser and type http://Belkin.range to access the settings. use the default Login Given Below Extender to access the settings.

3- Rest all settings are the same as given above Just follow the Onscreen Guide. after Setting Up Extender Place it anywhere Within 30-40 feet From Main Router.

Know what Belkin had to say about this – belkin extender configuartion guides

😉 Please comment below and let us know if you have any other problems with your Belkin range extender.

🙂 We thank you for reading at fixingblog.com

Good Luck