5 Ways To Fix iPhone Error “This accessory may not be supported”

Hello Everyone,

Do You Have an iPhone Or iPad With Error accessory may not be supported While You Plug Charger Or Any Cable . ?

If Your Answer Is Yes Than You Are On Right Place .

On Internet People Have made this Problem Like Its Some kind Of Rocket Science But We Do Find It Easy to fix This Issue .

We Have A Complete Guide To Fix this problem . Please Read Till End To Fix This Issue –

First Lets Start With Basic Steps First –

Charging The Phone With Error –

Dear friends it Happen Most of the time with charger so Try this

  • Please Plug your Charger to your Apple Device .
  • Now If You See that error Just Click On Dismiss And shut down your Phone while its plugged in
  • Leave it charging for 20 -25 minutes
  • Now turn it back on and see if this fix Your Problem .

Friends We Will Always Advice you to use the branded Apple charger to charge apple devices .

Cleaning The Charging Slot –

Sometime Dust Can Cover Charging Slot Or Any Other Port To Your Phone Or Device and that Can Cause This Error”accessory may not be supported”

 

 

 

 

 

Friends Toothpick Can Be Useful This Is Something That You May Get To Know Today –

 

 

 

 

 

 

  • Unplug the Charger and take a toothpick Or Small Soft Tiny Brush . You Can Use Pencil Also .
  • Gently Remove All the Dust From Charging Slot and Restart Your Phone .
  • Try Cleaning All Metal  Contact On Charger And Port .
  • Now Plug Your Charger See If That Works .

Using Pin To Fix Charger –

 

Folks Most Of Time When You Plug Charger Quickly To Phone You Can Cause Damage To Your Charging Pin Or Connector .

Use A Tiny Pin to straight out your charging pins so your charger can get proper connection .

Changing This Cable –

Dear Folks Sometime You Cable is Broken Or Connector is Damaged In That Case You Must Change the Charger Or Charging Cable Of Your Devices .

You Can Also Try Getting You Charger Slot Changed On Your Phone Once you have already tried changing your charging cable .

We Hope That all these steps May Help You To Fix The Problem .

Please Comment Below And Let us know If Your Phone has still This Problem .

We Thank You For reading at fixingblog.com

 

 

iPhone Won’t Connect to Belkin Wireless router ?

Hello Folks,

Welcome to Fixingblog.com

Dear Friends this is a Common Issue and lot of people had this Problem Over the time.

Once in While you have a new iPhone or may be Friends Or relative Come Over with there iPhone Or may be any other android Phones.

But let us tell You From the beginning STOP Blaming Technology .

You just Need little Troubleshooting steps to fix the Connection between your Belkin router and phone .

So lets Get started with basic Steps and fix this little  Problem –

Continue reading “iPhone Won’t Connect to Belkin Wireless router ?”

(Quick tips) How to fix a iPhone(Any version) won’t connect to wireless

Hello folks ,

Welcome to fixingblog.com

Friends i understand your iPhone is just not a phone its a social status Trademark  and i can understand how much you love it .

while iPhone is not connecting to wireless system it can create problem in your daily routine . your want your iPhone to work prefect with wireless network .

Here are some step’s to fix your wireless issue-

Basic iPhone wireless Troubleshooting –

first Make sure your router is on and that you’re within range.

Restart your iPhone or iPad.
Restart your modem and your router.
Check All of Your Cables and Connections.

1- Turn Wi-Fi off and back on.

  • Go to Settings >
    Tap on Wi-Fi, and toggle the switch next to Wi-Fi to On or Off.

2- Check your Wi-Fi Router.

The first thing you need to do is checking and see if other devices can be connected. This will let you know whether there is a problem with your Wi-Fi router or your iphone.

If you find there is something wrong with your router, you can try to switch off router and your iPhone for 30 seconds, and then turn them on to see if your iPhone can connect to Wi-Fi network. If fails, please read on!

2- Reset Your Network On your iPhone iPad-

  • Go to Settings >
  • Tap on General >
  • Now Tap on Reset >
  • Tap on Reset Network Settings. This will reset Wi-Fi networks and passwords, cellular settings that you have used before.

3- Upgrade your iphone/router firmware – sometime you can fix your iPhone wireless by just doing update on router and phone .

Check if there is an update for your iPhone iPad,

  • To check software update on your iPhone iPad:-
  • Go to Settings >
  • Tap on General >
  • Please Tap on Software Update.
  • Confirm to update your firmware..
4) Change iOS Default DNS to Google DNS

To fix iPhone iPad Wi-Fi slow problem, you can try to change the default DNS to Google DNS with steps below:-

  • Go to Settings >
  • Tap on Wi-Fi >
  • Find your Wi-Fi network >
  • Click button >
  • Tap on DNS >
  • Delete the original DNS >
  • Input 8.8.8.8,  8.8.4.4, and then back to Choose a Network screen to connect your iPhone iPad again.

4) Reset Your Router

If your iPhone or iPad continues to have Wi-Fi problems, you can try to reset the router by turning it off for 30 seconds and then turning it on again. and re-configure your setting.

if your problem has been not fixed then try to Reset your iphone-

5- Reset your iphone-

Before your try this Please back up your phone data and do remember please try doing a software update on your phone using iTunes before you reset the i phone

  • Open iTunes on your pc.
  • Connect your iPhone to your computer with the help of cable that come with your device.
  • Enter your pass code or to trust this computer follow the onscreen steps.
  • Select your iPhone when it appears in iTunes.
  • Click on summary and in the summary panel click on restore device.
  • Click on restore to confirm again.

Read  More Quick Steps- How to Reset iPhone to factory settings

Then iTunes erases your device and install the latest ios software.
After your device restore to factory setting. it restart automatically..

Now try to connect your iPhone to your WiFi network…

For more help

I hope this will help you to fix  iPhone wireless if not then please  share your comment’s below

We thank your for reading at fixingblog.com

Quick Steps- How to Reset iPhone to factory settings

Hello friends ,

Welcome to fixingblog.com

How to Reset iPhone to factory settings –

Here are two method’s to reset your iPhone

before we go further First you have to backup your all personal data using iTunes .

1- Reset iPhone to Factory Settings through iPhone –
  • Launch setting.
  • Tap on general.
  • Scroll down in the bottom of general.
  • Tap on reset.
  • Tap on Erase all content and settings.
  • Enter the iPhone password .
  • Confirm the reset by tapping on erase iPhone .It will reset your phone after restarting.. now you can set it up as a new phone .

2- Reset/Restore your iPhone by iTunes

We consider this is the best option and in most of the cases we always recommend ,

use  iTunes to update ,backup and reset the apple products .

first we need a computer to perform a reset or restore on iPhone using iTunes .

if you have a mac computer that’s  Great if not you can just download iTunes for windows computer also from apple website .

  • Turn on your computer and iPhone .
  • Open iTunes application  on your computer.
  • Please Connect your iPhone to your computer with the help of cable that come with your device.
  • Enter your pass code or to trust this computer follow the onscreen steps.
  • Now Select your iPhone when it appears in iTunes.
  • Click on summary and in the summary panel click on restore device.
  • Click on restore to confirm again.
  • Then iTunes erases your device and install the latest ios software.
    After your device restore to factory setting. it restart automatically.

 

I hope this will help you out to Reset iPhone .

you can always go to apple store and they Can do all this service if your iPhone is under warranty .

if not then please comment below and let us know about it .

we than you for reading at fixingblog.com