Why d-link router is not working anymore ?

Why d-link router is not working anymore ?

Hello folks,

Welcome to fixing the blog.

Friends, I have used Dlink router for almost 3 years. it worked Great but sometimes it was overheating and some other issues. but after that, it worked like charm.

d-link is a known brand and they make router for the long run. but Once in while You can have this problem with any wireless router.

In this post, we will help you to Troubleshoot the Dlink wireless router and Get the router working again.

Why dlink router not working?

folks this a known and common issue. Sometimes it happens due to IP address misplaced from one device overlap to another device for getting router work

or maybe you just need a restart on your devices .

Follow these steps –

Basic steps before you continue- 

Before you continue and be ready with full attention to fix dlink router try these normal steps –

  • Reboot Your modem and wait for 1 min .
  • Then reboot your router and wait for 2-3 min
  • Make sure modem to router connection and cable is connected .
  • Try connecting the modem with computer directly just to make sure internet service provider (Modem ) side giving you internet .

If not, reset the router. The reset button for the router is located in a small hole in the case of the router. Using a tooth pick press the button and hold for ten seconds.

reset dlink range

Note : – Resetting the router will return it to it’s Out of the Box state. You will need to reconfigure the admin password, and any settings you have made to the router. Reboot your PC’s and connect to the internet.

Read More About : how to setup d-link wireless router ?

I hope this will help you .

Let’s verify if you have all the network cables and connections plugged into the proper Ports.

your router is connected with modem using a ethernet cable .

In simple words first port of your router (mostly yellow port)has to be connected with the WAN port of your modem.

Your computer needs to be wired to the LAN Port of your router. Choose a different  LAN Port to see if there’s an issue with the Port that you’re using.

Now Please try rebooting the computer and router .

if that did not help. You can also try doing mac cloning depending on your Internet service provider . see if that helps

Who is your Provider? please contact With internet service provider see if they can help you .

Please comment below and let us know if you have any other problem with dlink router .

we thank you for reading at fixingblog.com

1 thought on “Why d-link router is not working anymore ?”

  1. you can go step by step –

    1. restart the router and restart the modem and computer
    2. unplug the cable and plug it back
    3. check the modem lights and open the router page
    4.make sure you have all settings fine and update the firmware
    now restart the system again and i hope this may solve the issue

Leave a Comment


Contact D-link Support - Toll-Free 1888-419-8111

Fix All Kinds Of Dlink Problems In Single CallĀ 

Traoubleshoot D-link Wireless ProblemĀ 

Please Dial 1888-419-8111